Slide runner wear strip snowmobile track5/31/2023 ![]() ![]() This plastic is very durable without being too stiff. That’s a mouthful, and you’ll see this listed as UHMW plastic more often than the other way around. The standard hyfax on most snowmobiles will be made of ultra high molecular weight polyethylene. These take away the burden of wear and tear, protecting the aluminum rails from damage and saving you money and hassle in the long run. ![]() So, to sum it all up – the hyfax is two strips of hard plastic placed on the bottom of the rear suspension rails. It is possible to replace the rails if they wear out without a hyfax, but the cost is much more than a new hyfax. The plastic that the hyfax is made of is a lot cheaper than the aluminum to replace, which is another advantage of having them on the rails. But as the rails wear down, this can start to cause issues. You can ride around without them, and you won’t notice any real difference in performance or feel. Technically a snowmobile doesn’t need a hyfax to operate. The hyfax fixes this issue by adding a layer of additional materials that wear out instead of the rails. Since the rails are typically made of aluminum, they can wear out pretty quickly under the constant friction the track creates as the snowmobile is driven around in the snow. It sits between the track and the rails, creating a layer of protection to prevent them from wearing down. The hyfax is a strip of strong and durable plastic that attaches to the bottom of these rails. As you can imagine, the constant movement of the track can cause a lot of wear and tear, which is why the hyfax was created. Modern snowmobiles use a suspension system in the rear that involves the track sliding over the rails. How do you know when Hyfax is worn out?.How do I know if I have Hyfax on my snowmobile?.Or us our reach out to us via email 24/7. If you any questions, need help in picking out the appropriate replacement track for your snowmobile and/or are ready to order call us at 60 M-F 10am to 4pm EST. You should inspect your sleds track periodically looking for signs of wear. Worn or broken inner drive lugs – This condition can cause track slippage as well as can cause the track to come off during riding.įor more information on checking your snowmobiles track for wear, check out the video below and view the official Camso (Camoplast) track inspection document.Ī worn track can present both safety and performance issues.Obvious damage – This includes tears in the track, pulled through studs which are no longer present, shredding and more.Worn or broken track clips – Broken guide clips will accelerate wear on the hyfaxes and cause a lack of performance.This is often due to age and/or improper off season storage. Dry rotting – The track will have tiny cracks in the material.This condition will be pretty obvious when looking at the track. Worn or broken lugs – Worn and broken lugs will hinder acceleration and braking.Listed below are some of the most common wear to look for on your snowmobiles track. One of the questions we receive quite often is, what do I look for to determine whether my snowmobiles track needs to be replaced? Well, there are several things to look for when inspecting your sleds track to determine whether it needs to be replaced. ![]()
0 Comments
Leave a Reply. |